1. Product description FS00701 electrochemical ozone module adopts high stability gas sensor and high performance microprocessor, which provides digital output and is easy to use. The module uses precise automated calibration, testing equipment, reducing the interference of human factors, mass production mean time to ensure the accuracy of the data, good consistency.
This ozone module is small in design, easy to integrate, with UART, PWM, analog voltage and other output modes, and can expand the range to meet the development needs
2. Module characteristics. High sensitivity, high stability, high resolution
. Good anti-interference ability, with temperature compensation
. Good linear output
. Low power consumption, long service life
. Provide UART, DAC output mode
3. Main application. Air Quality monitors, portable instrument, air cleaner
. Fresh air ventilator, air conditioning, equipment for smart home
. Hospital, hotel and school and locus public
4. Technique index| Formaldehyde module(FS00701)Technical index |
| Detection of gas | ozone |
| Interference gas | NO2, CL2 and other gases |
| Output mode | UART output（3.3V） |
| DAC(0.4～2V Standard voltage signal)( Reserve) |
| PWM(Reserved, can be customized) |
| Operating voltage | 3.7V～6V |
| Operating current | ＜10mA |
| Warm up time | ≤3min |
| Response time | ≤90s |
| Recovery time | ≤90s |
| Range | 0～10PPM |
| Resolution ratio | 0.01PPM |
| Operating temperature | -10℃～55℃ |
| Operating humidity | 15%RH-90％RH（No condensation） |
| Storage temperature | -20℃～55℃ |
| Service life | 2years（in the air） |
Table 1: technical indicators
*NB: Sensor performance tested under standard conditions of 293K, 1atm., 35%RH. Sensors are best stored at 20°C in sealed plastic bags for maximum storage life.
5. Size Figure 1: outline dimensions (unit: mm, error ±0.2mm)
Latest Demand
