Specification
1. Display: 5 digit 0.56 inch red sunlight readable LEDS
2. Power：
AC Power：AC85V-265V, 50Hz/60Hz, 3W
Isolation: 2500Vrms for 1 min. to all inputs and outputs
DC Power：DC18V-32V, 3W
Isolation: 500Vrms for 1 min. to all inputs and outputs
3. Annunciators
MAX –maximum readout selected
MIN – minimum readout selected
TOT – totalizer readout selected
SP1 –setpoint alarm 1 is selected
SP2 –setpoint alarm 2 is selected
SP3 –setpoint alarm 3 is selected or user 1 input is active
SP4 –setpoint alarm 4 is selected or user 2 input is active
REF –relative value is displayed
STB –stable
4. Key：3 programmable function keys, 5 keys total
5. A/D Convertor：24 bit resolution
6. Update Rate：
Display Update Rate: 1-20 times/sec.
Output Control Delay：0-3275 sec.
MAX or MIN value capture delay: 0-3275 sec.
Analog Output Update Rate: 1-20times/sec.
7. Display Message:
“OH---” input signal exceeds the high range
“OL---” input signal exceeds the low range
“uuuuu” display value exceeds the high range,(>99999)
“nnnnn” display value exceeds the low range,(<-19999)
“E---” totalizer value exceeds a 9 digit value (>999999999)
“h…” the high order 4 digits of totalizer value is displayed
8. Input Range: See specific product specifications
9. Excitation Power: See specific product specifications
10. Low Frequency Noise Rejection:
Normal Mode: >60db，50 or 60Hz±1%
Common Mode: >80db，50 or 60Hz±1%
11. Digital User Input: 6 Programmable digit user input, dry contact
Isolation from load cell input common: 500Vrms for 1 min.
response time: 50ms(MAX)
Input state: contact resistor
active: <1kΩ
inactive: >20kΩ
12. Totalizer/Differentiator:
Time base: second, minute, hour, day
Can accumulate input display from a user input
Can set differential time(differentiator)
Time Accuracy: 0.01%typical
Decimal: 0 to 0.0000
Scale Factor: 0.001 to 32.500
Low Signal Cut-out: -19999 to 99999
Total: 9 digit, display alternates between high 4 bit and low 5 bit readouts
13. Custom Nonlinear Signal Correction:
Data Point Pairs: Selectable from 2 to 16
Display Range: -19999-99999
Decimal Point: 0 to 0.0000
Ice Point Compensation: user value (0.00-650.00μV/℃)
14. Memory: Nonvolatile EEPROM save all programmable parameters
and display value
15. Environment Conditional:
Operating Temperature Range: 0 to 50℃(0 to 45℃with all the expansion
cards assembled)
Storage Temperature Range: -40-60℃
Operation and Storage Humidity<85%RH non-condensing
16. Conditions: Screw clamp terminals
Wire diameter: 22 to 12AWG Torque: 8.0Kgf.cm
Screw: M4.0, Iron, Nickel Weld leg: Brass, Tinning
17. Weight：0.35kg
NOTE：
In electromagnetic interference environments, instrument performance will
be reduced, display value or analog output signal may deviate. Install the
controller at metal shield box and connect all input and output shield to
ground reliable is effective.
Latest Demand
