Digital Vibration Sensors
YD280 digital vibration sensor in the traditional analog signal output on the basis of technological updates a RS485 communication protocol mode of the latest products, this product, regardless of the structure or volume of the current domestic early launch of a new generation of vibration monitoring sensors. The sensor built-in high-speed digital processor (DSP) with RS485 standard industrial bus, it can be directly converted to mechanical vibration signals digitized waveform data, and through the sensor's RS485 interface to the computer processing.
Vibration measurement range: Maximum acceleration ±50g
Maximum vibration speed 200mm/s
Maximum vibration displacement 8mm
● Sensor type: acceleration
● Vibration sensor: piezoelectric
● Output method: 485 output
● Frequency range: 10Hz to 5,000Hz (acceleration amount)
● Frequency range: 10Hz to 1,000Hz (velocity amount/displacement)
● Velocity direction: From the bottom to the sensor (forward)
● Vibration resolution: 12 bits
● Sampling rate: 12.8kHz
● Ambient temperature: -40°C ~ +85°C
● Non-linearity: 0.2% (full scale)
● Power supply: +12~+24Vdc
● Data interface: RS485 standard industrial bus
● Maximum number of networked sensors: 64
● Alarm contact capacity: DC28V 3A
● Relay status: normally open
● Maximum impact force: 2000g
● Piezoelectric material: PZT-5
● Protection class: Ip67
● Weight: about 450g
● Dynamic range: <70dB
● Shell material: 304 stainless steel
